cheap tyres for sale

SA Custom Kinetics Zero SSML

ItemPart No.Price eachShippingQty
13x7.0|4x100|-8 13" 620kg
82410134
R 891.00
*
Add To Cart
13x7.0|4x108|-8 13" 620kg
82410066
R 891.00
*
Add To Cart
13x7.0|4x114|-8 13" 620kg
82410062
R 891.00
*
Add To Cart
15x6.5|4x100|15 15" 690kg
82410150
R 1148.00
*
Add To Cart
15x7.5|4x108|00 15" 690kg
82410067
R 1148.00
*
Add To Cart
15x7.5|4x114|00 15" 690kg
82410083
R 1148.00
*
Add To Cart
15x7.5|5x120|00 15" 690kg
82410063
R 1148.00
*
Add To Cart

* Shipping to be calculated.

SA Custom Kinetics Zero SSMLClick to enlarge
SA Custom Kinetics Zero SSML
Fitment tips
  • Test fitment of your new rims to vehicle first, before fitting the tyre.
  • Test PCD (Pitch Circle Diameter) centre bore offset and x-factor clearance.
  • If the rim does not fit first time to hub, do not force on. May be the wrong PCD.
  • Ensure correct nuts or bolts are being used. A minimum of 5 full revolutions of the nut or bolt must be attained.
  • If wheel nuts/bolts do not fit smoothly up to torque, do not force tighten. If force is used, the bolt/nut may be incorrect and may strip the thread.
  • Check if centre ring (spigot) is required. The spigot will centre the rim onto the hub, ensuring far greater wheel/tyre balance.
  • Once fitted, spin wheel & tyre combo before lowering vehicle. This will ensure that the rim/tyre is centered correctly.
  • Torque wheel bolts/nuts to manufacturers specifications in correct sequence. This will ensure correct torque around the entire contact area.
  • Ensure that you use the correct wheel spanner fitment.
  • Re-torque wheel bolts/nuts 100 km - 500 km after fitment of new rims.