cheap tyres for sale

A-LINE Gear BKMF Black Machine Face

ItemPart No.Price eachShippingQty
15x6.5|5x100|35 15" 620kg
82402951
R 1062.00
*
Add To Cart
15x6.5|5x114|38 15" 620kg
82402980
R 1062.00
*
Add To Cart
16x7.0|5x100|35 16"
82402965
R 1292.00
*
Add To Cart
16x7.0|5x112|45 16"
82402950
R 1292.00
*
Add To Cart
16x7.0|5x114|42 16"
82402979
R 1292.00
*
Add To Cart
17x7.5|5x100|35 17" 690kg
82402952
R 1435.00
*
Add To Cart
17x7.5|5x112|45 17" 690kg
82402953
R 1435.00
*
Add To Cart
18x8.0|5x112|45 18"
82402954
R 1866.00
*
Add To Cart

* Shipping to be calculated.

A-LINE Gear BKMF Black Machine FaceClick to enlarge
A-LINE Gear BKMF Black Machine Face

Gear BKMF - Black Machine Face

Fitment tips
  • Test fitment of your new rims to vehicle first, before fitting the tyre.
  • Test PCD (Pitch Circle Diameter) centre bore offset and x-factor clearance.
  • If the rim does not fit first time to hub, do not force on. May be the wrong PCD.
  • Ensure correct nuts or bolts are being used. A minimum of 5 full revolutions of the nut or bolt must be attained.
  • If wheel nuts/bolts do not fit smoothly up to torque, do not force tighten. If force is used, the bolt/nut may be incorrect and may strip the thread.
  • Check if centre ring (spigot) is required. The spigot will centre the rim onto the hub, ensuring far greater wheel/tyre balance.
  • Once fitted, spin wheel & tyre combo before lowering vehicle. This will ensure that the rim/tyre is centered correctly.
  • Torque wheel bolts/nuts to manufacturers specifications in correct sequence. This will ensure correct torque around the entire contact area.
  • Ensure that you use the correct wheel spanner fitment.
  • Re-torque wheel bolts/nuts 100 km - 500 km after fitment of new rims.