cheap tyres for sale

Mickey Thompson Wheel Classic 3 Silver

ItemPart No.Price eachShippingQty
17x9.0|6x139|-12 17" 1134kg
R 3900.00
Add To Cart

* Shipping to be calculated.

Mickey Thompson Wheel Classic 3 SilverClick to enlarge
Mickey Thompson Wheel Classic 3 Silver



The Mickey Thompson Classic III wheel features the classic 8-Hole design in a highly polished finish that includes matching polished hand holes. The embossed M/T logo is assurance of quality, strength and dependability. The Classic III will be available in sizes 15x8 through 17x9.

  • Redesigned smooth outer lip for clean appearance
  • Unique sizing includes 15x12 and 16x12
  • Non-corrosive screw on center cap
Fitment tips
  • Test fitment of your new rims to vehicle first, before fitting the tyre.
  • Test PCD (Pitch Circle Diameter) centre bore offset and x-factor clearance.
  • If the rim does not fit first time to hub, do not force on. May be the wrong PCD.
  • Ensure correct nuts or bolts are being used. A minimum of 5 full revolutions of the nut or bolt must be attained.
  • If wheel nuts/bolts do not fit smoothly up to torque, do not force tighten. If force is used, the bolt/nut may be incorrect and may strip the thread.
  • Check if centre ring (spigot) is required. The spigot will centre the rim onto the hub, ensuring far greater wheel/tyre balance.
  • Once fitted, spin wheel & tyre combo before lowering vehicle. This will ensure that the rim/tyre is centered correctly.
  • Torque wheel bolts/nuts to manufacturers specifications in correct sequence. This will ensure correct torque around the entire contact area.
  • Ensure that you use the correct wheel spanner fitment.
  • Re-torque wheel bolts/nuts 100 km - 500 km after fitment of new rims.