cheap tyres for sale

UPDATE - Adjusted Level 1 From Friday 1st October 2021.  www.sacoronavirus.co.za

When someone tries to discourage you from doing something simply because it has never been done before, remind them that all that has ever been achieved in life, began as something that had never been done before.

A-LINE Tank STBKMILLED Satin Black Milled

ItemPart No.Price eachShippingQty
17x8.5|6x139|00 17" 1100kg
82360606
R 2120.00
*
Add To Cart
18x9.0|6x139|18 18" 1100kg
82360607
R 2734.00
*
Add To Cart

* Shipping to be calculated.

A-LINE Tank STBKMILLED Satin Black MilledClick to enlarge
A-LINE Tank STBKMILLED Satin Black Milled

Tank STBKMILLED - Satin Black Milled

Fitment tips
  • Test fitment of your new rims to vehicle first, before fitting the tyre.
  • Test PCD (Pitch Circle Diameter) centre bore offset and x-factor clearance.
  • If the rim does not fit first time to hub, do not force on. May be the wrong PCD.
  • Ensure correct nuts or bolts are being used. A minimum of 5 full revolutions of the nut or bolt must be attained.
  • If wheel nuts/bolts do not fit smoothly up to torque, do not force tighten. If force is used, the bolt/nut may be incorrect and may strip the thread.
  • Check if centre ring (spigot) is required. The spigot will centre the rim onto the hub, ensuring far greater wheel/tyre balance.
  • Once fitted, spin wheel & tyre combo before lowering vehicle. This will ensure that the rim/tyre is centered correctly.
  • Torque wheel bolts/nuts to manufacturers specifications in correct sequence. This will ensure correct torque around the entire contact area.
  • Ensure that you use the correct wheel spanner fitment.
  • Re-torque wheel bolts/nuts 100 km - 500 km after fitment of new rims.