cheap tyres for sale

A-LINE Ashton BKMF Black Machine face

ItemPart No.Price eachShippingQty
14x6.0|4x100|35 14" 620kg
82403015-100
R 918.00
*
Add To Cart
14x6.0|4x108|35 14" 620kg
82403015-108
R 918.00
*
Add To Cart
15x6.5|4x100|35 15" 620kg
82403017-100
R 1062.00
*
Add To Cart
15x6.5|4x108|35 15" 620kg
82403017-108
R 1062.00
*
Add To Cart
15x6.5|5x114|38 15" 620kg
82402995
R 1062.00
*
Add To Cart

* Shipping to be calculated.

A-LINE Ashton BKMF Black Machine faceClick to enlarge
A-LINE Ashton BKMF Black Machine face

Ashton BKMF Black Machine Face.

Fitment tips
  • Test fitment of your new rims to vehicle first, before fitting the tyre.
  • Test PCD (Pitch Circle Diameter) centre bore offset and x-factor clearance.
  • If the rim does not fit first time to hub, do not force on. May be the wrong PCD.
  • Ensure correct nuts or bolts are being used. A minimum of 5 full revolutions of the nut or bolt must be attained.
  • If wheel nuts/bolts do not fit smoothly up to torque, do not force tighten. If force is used, the bolt/nut may be incorrect and may strip the thread.
  • Check if centre ring (spigot) is required. The spigot will centre the rim onto the hub, ensuring far greater wheel/tyre balance.
  • Once fitted, spin wheel & tyre combo before lowering vehicle. This will ensure that the rim/tyre is centered correctly.
  • Torque wheel bolts/nuts to manufacturers specifications in correct sequence. This will ensure correct torque around the entire contact area.
  • Ensure that you use the correct wheel spanner fitment.
  • Re-torque wheel bolts/nuts 100 km - 500 km after fitment of new rims.